History, development, service, specifications, pictures and 3D model.
Petlyakov Pe-2, Pe-3.
Type: Attack bomber, dive bomber, heavy fighter, ground attack, reconnaissance aircraft.
History:In a long operational career the Petlyakov Pe-2 was extremely successful in a variety of roles: heavy fighter, light bomber, ground attack, reconnaissance and night fighter. It may well have been the most versatile Russian combat type to enter service during World War II. Over 11,000 Pe-2s were built, and the type was improved steadily throughout the war. Along with the equally effective Ilyushin Il-2 Stormowvik, the Pe-2 provided the spearhead of the Red Air Force’s tactical bomber units.
The Pe-2 project got under way in 1938, when a team headed by Vladimir Petlyakov began designing what was to be an extremely advanced aircraft for its time: a heavy twin-engined fighter with a pressurised cabin for highaltitude combat. This was however never completed, because its specification was superseded by a call for a high-altitude bomber instead of a fighter.
But despite the change in specification, much of the original design was kept. When the prototype appeared in 1939, its elegant lines created something of a stir, and its handling proved unusually lively for a bomber. Tests then revealed that the high-altitude sighting equipment was not satisfactory, and it was decided to convert the aircraft into a dive-bomber. The main alterations were a reinforced and reshaped tailplane, and the installation of dive brakes on the wing under surfaces. It was this version of the Pe-2 that was first put into production and, beginning in 1941, first delivered to units.
An all-metal, low-wing monoplane with twin vertical tail units and a retractable undercarriage, it was powered by 1,1OOhp Klimov M-I05Rs driving three-bladed variable-pitch metal propellers. This Petlyakov was the first Russian type in which great attention was devoted to the arrangement of the controls. In fact it was almost overdone: there were 18 electrical servo-mechanisms and a hydraulic system for the main controls.
The dive-bomber version was followed by a heavy fighter that could also be used for long-range reconnaissance and ground attack. Beginning in 1942, the armament and armour were changed to allow the plane to withstand the newest German fighters.
An improved version appeared in 1943. It was powered by 1,210hp M-1O5PFs and incorporated several aerodynamic and structural alterations. The final versions, developed late in WW2 , were a long-range reconnaissance model, a trainer and a high-altitude fighter.
Ironically it was an accident with one of these aircrafts that Petlyakov lost his life in 1942.
Users: Russia/Soviet Union.
Animated 3D model Petlyakov Pe-2
Specifications Petlyakov Pe-2 (bomber version 1942)
|Power plant||Two Klimov (Hispano-Suiza basic design) vee-12 liquid-cooled M-105RA engines with 1,100 hp each|
|Wing span||56 ft 3.5 in (17.16 m)|
|Length overall||41 ft 6.5 in (12.66 m)|
|Height overall||13 ft 1.5 in (4.0 m)|
|Wing area||436 sq.ft (40.50 m²)|
|Weight empty||c. 12,900 lb (c. 5,870 kg)|
|Weight maximum loaded||18,780 lb (8.520 kg)|
|Max wing loading||?|
|Max power loading||?|
|Max level speed||336 mph at 12,990 ft (540 km/h in 3.960 m)|
|Cruising speed||266 mph at 16,405 ft (428 km/h in 5.000 m)|
|Initial climb||c. 1,430 ft/min (ca. 436 m/min.)|
|Time to height||7.0 minutes to 16,405 ft (7.0 min. to 5,000 m)|
|Service ceiling||28,870 ft (8,800 m)|
|Range||932 miles (1,500 km)|
|Range with maximum bomb load||746 miles (1,200 km)|
|ahead||4 xfixed 7.62-mm ShKAS machine-guns above nose (2) and beam (2)|
|upper rear position||1 x 12.7-mm-BS in power turret|
|retracting ventral mount||1 x 12.7-mm-BS machine-gun|
|bomb load||2,205 lb (1,000 kg). Final models up to 6,615 lb (3,000 kg)|
|First flight (VI-100)||1939|
|First production (Pe-2)||June 1940|
|Final delivery||probably January 1945|
|Total production figure (all versions)||over 11,400|